Smart Meters & Sensors on the web | Outpost Central
Outpost Central | Deloitte Fast500 Asia Pacific 2009 Outpost Central | Deloitte Fast50 NZ Outpost Central | Deloitte Fast500 Asia Pacific 2008
HomeWebsite FeaturesHardwareSolutionsWho's Using Outpost?NewsContactLogin
Skip Navigation Links
Overview
Outpost Eclipse Smart Meter
Outpost-LP IP67 GPRS Logger
Outpost Aura Series Loggers
IO Expansion Modules
Wireless Mesh Hardware

Outpost-LP
RoHS

3 Channel Rugged GPRS Data Logger


Main Features
  • Channels: 2 x Pulse Count/0-20mA, 3 x 0-20mA
  • Communications: GPRS to website (Anywhere with GSM coverage)
  • Battery Life: Depends on battery pack and configuration. Very low power design.
  • Case: IP-67 Rated
Introduction
The Outpost LP is a rugged 3-Channel data logger that connects meters & sensors directly to the web using GPRS. Connect most analog/digital meters & sensors as well as RS-232 & RS-485 based digital meters & sensors.

Data is displayed in web-based graphs & reports according to user-selected application templates, or forwarded to 3rd party databases. Outpost loggers that are managed directly from password protected web-consoles.

Select from any of the following web-site application templates appropriate for the type of meter or sensors being monitored:
  • Water Meter: Time of Use & Leak Detection
  • Water Meter: Sub-Metering Usage & Billing
  • Water Meter: Resource Consent Monitoring
  • Water Meter: Residential AMR
  • Power Meter: Basic Time of Use
  • Power Meter: Sub-Metering & Adv Parameters
  • Irrigation: Soil Moisture Monitoring
  • Wind Energy
    		•  Screenshot: Water Meter Time-of-Use

    Specifications
    Part Number OUTPOST-LP
    Power Supply Voltage: 5-20 VDC
    Active Mode Current (module active & GPRS transmitting): 200 mA
    Idle Mode Current (module active & no GPRS): 40 mA
    Power-down Sleep Current: < 120 uA
    GSM/GPRS Frequency Band: 900/1800/850/1900 MHz
    Antenna: SMA
    Data Logger Flash Memory: 1 million
    Channel Sampling Rate: Max 2s
    Analog Inputs Channels: 3 single-ended 0-20mA
    shared with digital
    Accuracy: 0.1% uncalibrated
    0.02% calibrated
    Electrical: 100 Ohms impedance
    Protected to 30V
    Digital Inputs Channels: 2 x Pulse Counter
    (25ms debounced)
    shared with analog
    Electrical: Internal Pull-up to 3.3V
    Frequency: Max 10Hz
    Physical Properties Size: 12cm x 6.4cm x 4cm
    Weight: 5.25 oz (150g)
    Operating Temperature: -40 to 85 ℃ (industrial)

    Home Home Web Features Hardware Solutions
    Contact Graphs Low Power Smart Water Meters
    Who's using Outpost? Sensor Templates Industrial Electricity Monitoring
    Login Maps Wireless Mesh Soil Moisture Monitoring
    Copyright © 2008 OutpostCentral. All Rights Reserved.